# Gelişmiş Yapılandırma

Starship çok yönlü bir kabuk olsa da, yine de belirli şeyleri yapması için `starship.toml`'u düzenlemek gerekebilir. Bu sayfa, Starship'i daha fazla yapılandırma tekniklerini anlatır.

> [!WARNING] The configurations in this section are subject to change in future releases of Starship.

## PowerShell'de TransientPrompt

Önceden yazdırılan istemi özel bir dizeyle değiştirmek mümkündür. Bu tüm bilgi istemi bilgilerinin her zaman gerekli olmadığı durumlarda kullanışlıdır. Etkinleştirmek için shell oturumunda `Enable-TransientPrompt`'u çalıştırın. Kalıcı hale getirmek için, profilinize `$PROFILE` ifadesini koyun. Geçicilik anında devre dışı bırakılabilir `Disable-TransientPrompt`.

Varsayılan olarak, girişin sol tarafı `>` ile değiştirilir. Bunu özelleştirmek için `Invoke-Starship-TransientFunction` adında yeni bir fonksiyon tanımlayın. Örneğin, Starship'in `karakter` modülünü burada göster, yapın

```powershell

function Invoke-Starship-TransientFunction {
  &starhip modülü karakteri
}

Invoke-Expression (&starship init powershell)

Enable-TransientPrompt
```

## TransientPrompt ve TransientRightPrompt Cmd'de

Clink allows you to replace the previous-printed prompt with custom strings. Bu tüm bilgi istemi bilgilerinin her zaman gerekli olmadığı durumlarda kullanışlıdır. To enable this, run `clink set prompt.transient <value>` where \<value\> can be one of:

- `always`: always replace the previous prompt
- `same_dir`: replace the previous prompt only if the working directory is same
- `off`: do not replace the prompt (i.e. turn off transience)

You need to do this only once. Make the following changes to your `starship.lua` to customize what gets displayed on the left and on the right:

- Varsayılan olarak, girişin sol tarafı `>` ile değiştirilir. To customize this, define a new function called `starship_transient_prompt_func`. This function receives the current prompt as a string that you can utilize. Örneğin, Starship'in `karakter` modülünü burada göster, yapın

```lua
function starship_transient_prompt_func(prompt)
  return io.popen("starship module character"
    .." --keymap="..rl.getvariable('keymap')
  ):read("*a")
end
load(io.popen('starship init cmd'):read("*a"))()
```

- By default, the right side of input is empty. To customize this, define a new function called `starship_transient_rprompt_func`. This function receives the current prompt as a string that you can utilize. For example, to display the time at which the last command was started here, you would do

```lua
function starship_transient_rprompt_func(prompt)
  return io.popen("starship module time"):read("*a")
end
load(io.popen('starship init cmd'):read("*a"))()
```

## TransientPrompt and TransientRightPrompt in Fish

Önceden yazdırılan istemi özel bir dizeyle değiştirmek mümkündür. Bu tüm bilgi istemi bilgilerinin her zaman gerekli olmadığı durumlarda kullanışlıdır. To enable this, run `enable_transience` in the shell session. To make it permanent, put this statement in your `~/.config/fish/config.fish`. Transience can be disabled on-the-fly with `disable_transience`.

Note that in case of Fish, the transient prompt is only printed if the commandline is non-empty, and syntactically correct.

- By default, the left side of input gets replaced with a bold-green `❯`. To customize this, define a new function called `starship_transient_prompt_func`. Örneğin, Starship'in `karakter` modülünü burada göster, yapın

```fish
function starship_transient_prompt_func
  starship module character
end
starship init fish | source
enable_transience
```

- By default, the right side of input is empty. To customize this, define a new function called `starship_transient_rprompt_func`. For example, to display the time at which the last command was started here, you would do

```fish
function starship_transient_rprompt_func
  starship module time
end
starship init fish | source
enable_transience
```

## TransientPrompt and TransientRightPrompt in Bash

The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework at v0.4 or higher allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:

The \<value\> here is a colon-separated list of `always`, `same-dir` and `trim`. When `prompt_ps1_final` is empty and the option `prompt_ps1_transient` has a non-empty \<value\>, the prompt specified by `PS1` is erased on leaving the current command line. If \<value\> contains a field `trim`, only the last line of multiline `PS1` is preserved and the other lines are erased. Otherwise, the command line will be redrawn as if `PS1=` is specified. When a field `same-dir` is contained in \<value\> and the current working directory is different from the final directory of the previous command line, this option `prompt_ps1_transient` is ignored.

Make the following changes to your `~/.blerc` (or in `~/.config/blesh/init.sh`) to customize what gets displayed on the left and on the right:

- To customize what the left side of input gets replaced with, configure the `prompt_ps1_final` Ble.sh option. For example, to display Starship's `character` module here, you would do

```bash
bleopt prompt_ps1_final='$(starship module character)'
```

- To customize what the right side of input gets replaced with, configure the `prompt_rps1_final` Ble.sh option. For example, to display the time at which the last command was started here, you would do

```bash
bleopt prompt_rps1_final='$(starship module time)'
```

## Custom pre-prompt and pre-execution Commands in Cmd

Clink provides extremely flexible APIs to run pre-prompt and pre-exec commands in Cmd shell. It is fairly simple to use with Starship. Make the following changes to your `starship.lua` file as per your requirements:

- To run a custom function right before the prompt is drawn, define a new function called `starship_preprompt_user_func`. This function receives the current prompt as a string that you can utilize. For example, to draw a rocket before the prompt, you would do

```lua
function starship_preprompt_user_func(prompt)
  print("🚀")
end

load(io.popen('starship init cmd'):read("*a"))()
```

- To run a custom function right before a command is executed, define a new function called `starship_precmd_user_func`. This function receives the current commandline as a string that you can utilize. For example, to print the command that's about to be executed, you would do

```lua
function starship_precmd_user_func(line)
  print("Executing: "..line)
end

load(io.popen('starship init cmd'):read("*a"))()
```

## Bash'e Özel ön-komut istemi(pre-prompt) ve ön-çalıştırma(pre-execution) Komutları

Bash, çoğu diğer kabuklar gibi resmi bir preexec/precmd çerçevesine sahip değildir. Bu yüzden, `Bash'i` tamamen özelleştirmek zordur. Ancak Starship, size istem oluşturma prosedürü sayesinde kendi işlevlerinizi ekleme konusunda sınırlı bir yetenek sağlar:

- Özel bir işlemi başlatmak için çizimin bitmesinden önce yeni bir işlev oluşturup adlandırmanız gerekmektedir.`starship_precmd_user_func`. Örneğin komut isteminden önce bir roket çizmek isterseniz

```bash
echo "🚀"
}
starship_precmd_user_func="fırlatıldı"
```

- Özel bir işlemi başlatmadan hemen önce komut istemini çalıştırıp, [`DEBUG`filtreleme mekanizmasını](https://jichu4n.com/posts/debug-trap-and-prompt_command-in-bash/) kullanabilirsiniz. Bununla birlikte, Starship başlatılmadan hemen _önce_, DEBUG sinyalini filtrelemek**zorundasınız.**! Starship, DEBUG filtrelemesinin ardından bazı değerleri içerisinde barındırabilir ancak filtreleme işlemi starship başlatıldıktan sonra yazılırsa bazı fonksiyonlar devre dışı kalabilir.

```bash
function blastoff(){
    echo "🚀"
}
trap blastoff DEBUG     # Trap DEBUG *before* running starship
set -o functrace
eval $(starship init bash)
set +o functrace
```

## Custom pre-prompt and pre-execution Commands in PowerShell

PowerShell does not have a formal preexec/precmd framework like most other shells. Because of this, it is difficult to provide fully customizable hooks in `powershell`. Ancak Starship, size istem oluşturma prosedürü sayesinde kendi işlevlerinizi ekleme konusunda sınırlı bir yetenek sağlar:

Create a function named `Invoke-Starship-PreCommand`

```powershell
function Invoke-Starship-PreCommand {
    $host.ui.Write("🚀")
}
```

## Pencere Başlığını Değiştirme

Some shell prompts will automatically change the window title for you (e.g. to reflect your working directory). Fish even does it by default. Starship does not do this, but it's fairly straightforward to add this functionality to `bash`, `zsh`, `cmd` or `powershell`.

First, define a window title change function (identical in bash and zsh):

```bash
function set_win_title(){
    echo -ne "\033]0; YOUR_WINDOW_TITLE_HERE \007"
}
```

You can use variables to customize this title (`$USER`, `$HOSTNAME`, and `$PWD` are popular choices).

In `bash`, set this function to be the precmd starship function:

```bash
starship_precmd_user_func="set_win_title"
```

In `zsh`, add this to the `precmd_functions` array:

```bash
precmd_functions+=(set_win_title)
```

If you like the result, add these lines to your shell configuration file (`~/.bashrc` or `~/.zshrc`) to make it permanent.

For example, if you want to display your current directory in your terminal tab title, add the following snippet to your `~/.bashrc` or `~/.zshrc`:

```bash
function set_win_title(){
    echo -ne "\033]0; $(basename "$PWD") \007"
}
starship_precmd_user_func="set_win_title"
```

For Cmd, you can change the window title using the `starship_preprompt_user_func` function.

```lua
function starship_preprompt_user_func(prompt)
  console.settitle(os.getenv('USERNAME').."@"..os.getenv('COMPUTERNAME')..": "..os.getcwd())
end

load(io.popen('starship init cmd'):read("*a"))()
```

You can also set a similar output with PowerShell by creating a function named `Invoke-Starship-PreCommand`.

```powershell
# edit $PROFILE
function Invoke-Starship-PreCommand {
  $host.ui.RawUI.WindowTitle = "$env:USERNAME@$env:COMPUTERNAME`: $pwd `a"
}

Invoke-Expression (&starship init powershell)
```

## Enable Right Prompt

Some shells support a right prompt which renders on the same line as the input. Starship can set the content of the right prompt using the `right_format` option. Any module that can be used in `format` is also supported in `right_format`. The `$all` variable will only contain modules not explicitly used in either `format` or `right_format`.

Note: The right prompt is a single line following the input location. To right align modules above the input line in a multi-line prompt, see the [`fill` module](../config/#fill).

`right_format` is currently supported for the following shells: elvish, fish, zsh, xonsh, cmd, nushell, bash.

Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework v0.4 or higher should be installed in order to use right prompt in bash.

### Example

```toml
# ~/.config/starship.toml

# A minimal left prompt
format = """$character"""

# move the rest of the prompt to the right
right_format = """$all"""
```

Produces a prompt like the following:

```
▶                                   starship on  rprompt [!] is 📦 v0.57.0 via 🦀 v1.54.0 took 17s
```

## Continuation Prompt

Some shells support a continuation prompt along with the normal prompt. This prompt is rendered instead of the normal prompt when the user has entered an incomplete statement (such as a single left parenthesis or quote).

Starship can set the continuation prompt using the `continuation_prompt` option. The default prompt is `'[∙](bright-black) '`.

Note: `continuation_prompt` should be set to a literal string without any variables.

Note: Continuation prompts are only available in the following shells:

- `bash`
- `zsh`
- `PowerShell`

### Example

```toml
# ~/.config/starship.toml

# A continuation prompt that displays two filled-in arrows
continuation_prompt = '▶▶ '
```

## Statusline for Claude Code

Starship supports displaying a custom statusline when running inside Claude Code, Anthropic's CLI tool for interactive coding with Claude. This statusline provides real-time information about your Claude session, including the model being used, context window usage, and session costs.

For more information about the Claude Code statusline feature, see the [Claude Code statusline documentation](https://code.claude.com/docs/en/statusline).

### Setup

To use Starship as your Claude Code statusline:

1. Run `/statusline` in Claude Code and ask it to configure Starship, or manually add the following to your `.claude/settings.json`:

```json
{
  "statusLine": {
    "type": "command",
    "command": "starship statusline claude-code"
  }
}
```

2. Customize the statusline appearance in your `~/.config/starship.toml` (see [Configuration](#configuration) below)

### Overview

When invoked with `starship statusline claude-code`, Starship receives Claude Code session data via stdin and renders a statusline using a dedicated profile named `claude-code`.

The profile includes three specialized modules:

- `claude_model`: Displays the current Claude model being used
- `claude_context`: Shows context window usage with a visual gauge
- `claude_cost`: Displays session cost and statistics

The default profile format is:

```toml
[profiles]
claude-code = "$claude_model$git_branch$claude_context$claude_cost"
```

### Yapılandırma

You can customize the Claude Code statusline by modifying the `claude-code` profile and individual module configurations in your `~/.config/starship.toml`:

```toml
# ~/.config/starship.toml

# Customize the claude-code profile
[profiles]
claude-code = "$claude_model$claude_context$claude_cost"

# Configure individual modules
[claude_model]
format = "[$symbol$model]($style) "
symbol = "🤖 "
style = "bold blue"

[claude_context]
format = "[$gauge $percentage]($style) "
gauge_width = 10

[claude_cost]
format = "[$symbol$cost]($style) "
symbol = "💰 "
```

### Claude Model

The `claude_model` module displays the current Claude model being used in the session.

#### Options

| Option          | Default                      | Description                                                                               |
| --------------- | ---------------------------- | ----------------------------------------------------------------------------------------- |
| `format`        | `'[$symbol$model]($style) '` | The format for the module.                                                                |
| `symbol`        | `'🤖 '`                       | The symbol shown before the model name.                                                   |
| `stil`          | `'bold blue'`                | The style for the module.                                                                 |
| `model_aliases` | `{}`                         | Map of model IDs or display names to shorter aliases. Checks ID first, then display name. |
| `disabled`      | `false`                      | Disables the `claude_model` module.                                                       |

#### Variables

| Variable  | Example             | Description                           |
| --------- | ------------------- | ------------------------------------- |
| model     | `Claude 3.5 Sonnet` | The display name of the current model |
| model_id  | `claude-3-5-sonnet` | The model ID                          |
| symbol    |                     | Mirrors the value of option `symbol`  |
| style\* |                     | Mirrors the value of option `style`   |

\*: This variable can only be used as a part of a style string

#### Examples

```toml
# ~/.config/starship.toml

# Basic customization
[claude_model]
format = "on [$symbol$model]($style) "
symbol = "🧠 "
style = "bold cyan"

# Using model aliases for vendor-specific model names
# You can alias by model ID or display name
[claude_model.model_aliases]
# Alias by vendor model ID (e.g. AWS Bedrock)
"global.anthropic.claude-sonnet-4-5-20250929-v1:0" = "Sonnet 4.5"
# Alias by display name
"Claude Sonnet 4.5 (Vendor Proxy)" = "Sonnet"
```

### Claude Context

The `claude_context` module displays context window usage as a percentage and visual gauge. The style automatically changes based on configurable thresholds.

#### Options

| Option                 | Default                           | Description                                        |
| ---------------------- | --------------------------------- | -------------------------------------------------- |
| `format`               | `'[$gauge $percentage]($style) '` | The format for the module.                         |
| `symbol`               | `''`                              | The symbol shown before the gauge.                 |
| `gauge_width`          | `5`                               | The width of the gauge in characters.              |
| `gauge_full_symbol`    | `'█'`                             | The symbol used for filled segments of the gauge.  |
| `gauge_partial_symbol` | `'▒'`                             | The symbol used for partial segments of the gauge. |
| `gauge_empty_symbol`   | `'░'`                             | The symbol used for empty segments of the gauge.   |
| `display`              | [see below](#display)             | Threshold and style configurations.                |
| `disabled`             | `false`                           | Disables the `claude_context` module.              |

##### Display

The `display` option is an array of objects that define thresholds and styles for different usage levels. The module uses the style from the highest matching threshold or hides the module if `hidden` is `true`.

| Option      | Default      | Description                                                              |
| ----------- | ------------ | ------------------------------------------------------------------------ |
| `threshold` | `0.0`        | The minimum context windows usage percentage to match this configuration |
| `stil`      | `bold green` | The value of `style` if this display configuration is matched            |
| `hidden`    | `false`      | Hide this module if this the configuration is matched.                   |

```toml
[[claude_context.display]]
threshold = 0
hidden = true

[[claude_context.display]]
threshold = 30
style = "bold green"

[[claude_context.display]]
threshold = 60
style = "bold yellow"

[[claude_context.display]]
threshold = 80
style = "bold red"
```

#### Variables

| Variable                     | Example | Description                                           |
| ---------------------------- | ------- | ----------------------------------------------------- |
| gauge                        | `██▒░░` | Visual representation of context usage                |
| percentage                   | `65%`   | Context usage as a percentage                         |
| input_tokens                 | `45.2k` | Total input tokens in conversation                    |
| output_tokens                | `12.3k` | Total output tokens in conversation                   |
| curr_input_tokens          | `5.1k`  | Input tokens from most recent API call                |
| curr_output_tokens         | `1.2k`  | Output tokens from most recent API call               |
| curr_cache_creation_tokens | `1.5k`  | Cache creation tokens from most recent API call       |
| curr_cache_read_tokens     | `23.4k` | Cache read tokens from most recent API call           |
| total_tokens                 | `200k`  | Total context window size                             |
| symbol                       |         | Mirrors the value of option `symbol`                  |
| style\*                    |         | Mirrors the style from the matching display threshold |

\*: This variable can only be used as a part of a style string

#### Examples

**Minimal gauge-only display**

```toml
# ~/.config/starship.toml

[claude_context]
format = "[$gauge]($style) "
gauge_width = 10
```

**Detailed token information**

```toml
# ~/.config/starship.toml

[claude_context]
format = "[$percentage ($input_tokens in / $output_tokens out)]($style) "
```

**Custom gauge symbols**

```toml
# ~/.config/starship.toml

[claude_context]
gauge_full_symbol = "▰"
gauge_partial_symbol = ""
gauge_empty_symbol = "▱"
gauge_width = 10
format = "[$gauge]($style) "
```

**Custom thresholds**

```toml
# ~/.config/starship.toml

[[claude_context.display]]
threshold = 0
style = "bold green"

[[claude_context.display]]
threshold = 50
style = "bold yellow"

[[claude_context.display]]
threshold = 75
style = "bold orange"

[[claude_context.display]]
threshold = 90
style = "bold red"
```

### Claude Cost

The `claude_cost` module displays the total cost of the current Claude Code session in USD. Like `claude_context`, it supports threshold-based styling.

#### Options

| Option     | Default                            | Description                         |
| ---------- | ---------------------------------- | ----------------------------------- |
| `format`   | `'[$symbol(\\$$cost)]($style) '` | The format for the module.          |
| `symbol`   | `'💰 '`                             | The symbol shown before the cost.   |
| `display`  | [see below](#display-1)            | Threshold and style configurations. |
| `disabled` | `false`                            | Disables the `claude_cost` module.  |

##### Display

The `display` option is an array of objects that define cost thresholds and styles. The module uses the style from the highest matching threshold or hides the module if `hidden` is `true`.

| Option      | Default      | Description                                                   |
| ----------- | ------------ | ------------------------------------------------------------- |
| `threshold` | `0.0`        | The minimum cost in USD to match this configuration           |
| `stil`      | `bold green` | The value of `style` if this display configuration is matched |
| `hidden`    | `false`      | Hide this module if this configuration is matched.            |

**Default configuration:**

```toml
[[claude_cost.display]]
threshold = 0.0
hidden = true

[[claude_cost.display]]
threshold = 1.0
style = "bold yellow"

[[claude_cost.display]]
threshold = 5.0
style = "bold red"
```

#### Variables

| Variable      | Example  | Description                                           |
| ------------- | -------- | ----------------------------------------------------- |
| cost          | `1.23`   | Total session cost in USD (formatted to 2 decimals)   |
| duration      | `1m 30s` | Total session duration                                |
| api_duration  | `45s`    | Total API call duration                               |
| lines_added   | `1.2k`   | Total lines of code added                             |
| lines_removed | `500`    | Total lines of code removed                           |
| symbol        |          | Mirrors the value of option `symbol`                  |
| style\*     |          | Mirrors the style from the matching display threshold |

\*: This variable can only be used as a part of a style string

#### Examples

```toml
# ~/.config/starship.toml

# Cost with code change statistics
[claude_cost]
format = "[$symbol$cost (+$lines_added -$lines_removed)]($style) "

# Hide module until cost exceeds $0.10
[[claude_cost.display]]
threshold = 0.0
hidden = true

[[claude_cost.display]]
threshold = 0.10
style = "bold yellow"

[[claude_cost.display]]
threshold = 2.0
style = "bold red"

# Show duration information
[claude_cost]
format = "[$symbol$cost ($duration)]($style) "
```

## Style Strings

Style strings are a list of words, separated by whitespace. The words are not case sensitive (i.e. `bold` and `BoLd` are considered the same string). Each word can be one of the following:

- `bold`
- `italic`
- `underline`
- `dimmed`
- `inverted`
- `blink`
- `hidden`
- `strikethrough`
- `bg:<color>`
- `fg:<color>`
- `<color>`
- `none`

where `<color>` is a color specifier (discussed below). `fg:<color>` and `<color>` currently do the same thing, though this may change in the future. `<color>` can also be set to `prev_fg` or `prev_bg` which evaluates to the previous item's foreground or background color respectively if available or `none` otherwise. `inverted` swaps the background and foreground colors. The order of words in the string does not matter.

The `none` token overrides all other tokens in a string if it is not part of a `bg:` specifier, so that e.g. `fg:red none fg:blue` will still create a string with no styling. `bg:none` sets the background to the default color so `fg:red bg:none` is equivalent to `red` or `fg:red` and `bg:green fg:red bg:none` is also equivalent to `fg:red` or `red`. It may become an error to use `none` in conjunction with other tokens in the future.

A color specifier can be one of the following:

- One of the standard terminal colors: `black`, `red`, `green`, `blue`, `yellow`, `purple`, `cyan`, `white`. You can optionally prefix these with `bright-` to get the bright version (e.g. `bright-white`).
- A `#` followed by a six-digit hexadecimal number. This specifies an [RGB color hex code](https://www.w3schools.com/colors/colors_hexadecimal.asp).
- A number between 0-255. This specifies an [8-bit ANSI Color Code](https://i.stack.imgur.com/KTSQa.png).

If multiple colors are specified for foreground/background, the last one in the string will take priority.

Not every style string will be displayed correctly by every terminal. In particular, the following known quirks exist:

- Many terminals disable support for `blink` by default.
- `hidden` is [not supported on iTerm](https://gitlab.com/gnachman/iterm2/-/issues/4564).
- `strikethrough` is not supported by the default macOS Terminal.app.
